Name:
Location: Bowling Green, Kentucky, United States

Powered by 

Blogger

Wednesday, April 05, 2006

 

Ad-Aware SE Guide

The second step to a cleaner PC (after updating your computer with Windows Update) is to run a full system scan with Ad-Aware SE. If you do not have Ad-Aware installed, download it here and install.

Step 1: During the install process, you will see a screen asking you if you want to “Perform a full system scan”, “Update definition file now”, or “Open the help file now”. Uncheck all three options, as you will be scanning and updating the definition file manually.

Step 2: If Ad-Aware did not start up automatically after installing, start it now. If you are not prompted to check for updates, click on the “Check for Updates” link on the main screen. If new updates are found, click OK when prompted to install them. The updates will start downloading. Click Finish when the updates have been installed.

Step 3: Click on the Gear Wheel icon at the top of the main screen, to enter the setup options. Setup the configurations as follows:

General > Safety & Settings: Check all three (make them green)

Tweak > Cleaning Engine: UNcheck "Always try to unload modules before deletion".

Step 4: Navigate back to the main screen. To start the scan, click “Scan Now”. Select the following options:

Deselect "Search for negligible risk entries" as negligible risk entries (MRU's) are not considered to be a threat.

Select "Search for low-risk threats"

Select "Perform full system scan"

Click Next

Step 5: Wait for the scan to complete. Don’t be alarmed if the scan finds hundreds of “Critical Objects”. This is normal for a computer that is riddled with spyware.

Step 6: When the scan completes, hit the Next button. On the “Critical Objects” tab, right-click with your mouse and choose “Select all objects”. Click on the Next button to quarantine (remove) the files. Click OK, when it asks if you want to remove the selected items.

Step 7: If you’re infected with really nasty stuff, you may get a message telling you that Ad-Aware could not successfully remove all items, and it will ask if it can remove the items the next time the computer is booted. Select OK. Go ahead and reboot your computer, so that these files can be removed.

Step 8: Test your computer to see if Ad-Aware has corrected your spyware problems. If not, it may be a good idea to rescan with Ad-Aware, with your PC booted into Safe-Mode. To boot into Safe-Mode, reboot your computer normally. Once your monitor goes black, start tapping the F8 key about once per second. Locate the selection for Safe Mode and select it. Click past the “You are in safe mode” messages, and get to your desktop. It may look different than normal, but this ok. Start Ad-Aware again, and follow the steps above to rescan. Reboot your computer again, in order to get back into regular mode.

Step 9: If Ad-Aware still did not successfully cure your spyware problems, move on to the scanning program Spybot Search & Destroy.

0 Comments:

Post a Comment

<< Home