Name:
Location: Bowling Green, Kentucky, United States

Powered by 

Blogger

Tuesday, April 11, 2006

 

Spybot Search & Destroy Guide

After you have updated your computer through Microsoft Updates, and after you have installed and scanned your PC with Ad-Aware SE, it is a great idea to install and scan with the free program Spybot Search & Destroy. Like I’ve said earlier, Ad-Aware only removes about 70% of the known spyware infections out there, and Spybot will likely discover some junk that Ad-Aware left behind.

If you have not already done so, download Spybot here. Install the program like you would normally install any program. When you get to the screen for "Select Additional Tasks", be sure to check “Use Internet Explorer Protection” and “Use System Settings Protection”. SDHelper will integrate into your Internet Explorer browser and block your browser from downloading "bad" programs from known malware sites. TeaTimer will constantly run on your computer in the background and notify you of any changes to system settings on your computer before they are allowed to happen. Both are great ways to prevent future spyware infections.

Step 1: Backup your registry. After installing the program, allow it to startup. You will be prompted to backup your registry, just in case something bad happens to the registry during the cleanup process.

Step 2: Search for program updates, and install any updates that are found.

Step 3: Immunize this system. After installing the updates, you will be prompted to immunize the system. Simply put, this will apply the updates.

Step 4: Check for Updates. Each time you start Spybot, you need to select Check for Updates. This is crucial in ensuring that you will be protected from the newest threats. If the latest updates were not applied during the installation process, check for updates now. Once updates are installed, the program will restart so that the updates will be applied.

Step 5: Check for Problems. After the program restarts, you will be presented with the main screen again. This time, you will see an option to Check for Problems. It will start scanning your computer for problems. This can take up to 30 minutes, so please be patient. It can also hog a lot of your memory and slow your PC down, so it may be a good idea to go do something else while it scans. When the scan is complete, it will show you a list of problems that it found. Be sure that everything in RED is check marked to be removed. You will also see a list of items that are in GREEN. These entries are usage tracks. Usage tracks are fingerprints left in your system that contains information about what you have done in the past with your computer. Information that is typically stored in these usage tracks are last open files, last used directories, web sites that you have visited, or files that you have opened. Fixing these entries can cause no harm to your system so if you would like to remove them, there will be no harm done.

Step 6: Fix Selected Problems. After you have selected all of the items that you want to remove from your computer (the red and green items), click on the button Fix Selected Problems. If you have Windows XP or ME, a system restore point will be created at this time. Just in case the cleaning process causes a problem in your registry, you can then go restore your computer back to this moment. If Spybot has trouble removing a particular problem, it will ask you if it can remove that particular problem during the next boot. Select Yes.

Step 7: Conclusion. Reboot your computer once it has finished removing problems. Once your computer has rebooted, browse around at your favorite sites, to ensure that you do not have anymore symptoms of spyware. If you feel that you still have a recurring problem after using Microsoft Update, Ad-Aware SE, and Spybot S&D, it may be time to try HijackThis. Don’t be alarmed if you still have an infection after using Spybot. Remember, that Ad-Aware only removes around 70% of known spyware, and Spybot removes roughly 65%. It’s very possible that you will still have a problem.

Wednesday, April 05, 2006

 

Ad-Aware SE Guide

The second step to a cleaner PC (after updating your computer with Windows Update) is to run a full system scan with Ad-Aware SE. If you do not have Ad-Aware installed, download it here and install.

Step 1: During the install process, you will see a screen asking you if you want to “Perform a full system scan”, “Update definition file now”, or “Open the help file now”. Uncheck all three options, as you will be scanning and updating the definition file manually.

Step 2: If Ad-Aware did not start up automatically after installing, start it now. If you are not prompted to check for updates, click on the “Check for Updates” link on the main screen. If new updates are found, click OK when prompted to install them. The updates will start downloading. Click Finish when the updates have been installed.

Step 3: Click on the Gear Wheel icon at the top of the main screen, to enter the setup options. Setup the configurations as follows:

General > Safety & Settings: Check all three (make them green)

Tweak > Cleaning Engine: UNcheck "Always try to unload modules before deletion".

Step 4: Navigate back to the main screen. To start the scan, click “Scan Now”. Select the following options:

Deselect "Search for negligible risk entries" as negligible risk entries (MRU's) are not considered to be a threat.

Select "Search for low-risk threats"

Select "Perform full system scan"

Click Next

Step 5: Wait for the scan to complete. Don’t be alarmed if the scan finds hundreds of “Critical Objects”. This is normal for a computer that is riddled with spyware.

Step 6: When the scan completes, hit the Next button. On the “Critical Objects” tab, right-click with your mouse and choose “Select all objects”. Click on the Next button to quarantine (remove) the files. Click OK, when it asks if you want to remove the selected items.

Step 7: If you’re infected with really nasty stuff, you may get a message telling you that Ad-Aware could not successfully remove all items, and it will ask if it can remove the items the next time the computer is booted. Select OK. Go ahead and reboot your computer, so that these files can be removed.

Step 8: Test your computer to see if Ad-Aware has corrected your spyware problems. If not, it may be a good idea to rescan with Ad-Aware, with your PC booted into Safe-Mode. To boot into Safe-Mode, reboot your computer normally. Once your monitor goes black, start tapping the F8 key about once per second. Locate the selection for Safe Mode and select it. Click past the “You are in safe mode” messages, and get to your desktop. It may look different than normal, but this ok. Start Ad-Aware again, and follow the steps above to rescan. Reboot your computer again, in order to get back into regular mode.

Step 9: If Ad-Aware still did not successfully cure your spyware problems, move on to the scanning program Spybot Search & Destroy.

 

Spyware, Adware, Malware, and Virus Removal using FREE Programs

If you’ve stumbled across my site, then you probably already know what spyware, adware, malware, and viruses are. To simplify things, I will lump all of these terms under “spyware”. If you have nonstop pop-up windows, if your homepage has been reset to some weird search page, or if your computer just seems to be extremely slow for no apparent reason, then you probably have some form of spyware. Even if your PC isn’t experiencing these symptoms, chances are extremely high that you have spyware on your computer if you browse the internet on a daily basis, and visit a variety of different websites.

Everywhere you look, there are ads for spyware removal programs. Almost all of these programs will do more harm than good. The bad programs will offer a FREE SCAN!, tell you they are scanning your computer, and then it will actually install spyware on your computer! It will then make you pay for the full program in order to remove what it just placed on your PC. What a rip-off! I know these things for a fact, because I learned the hard way. I ran a couple of these so-called free scans, only to have spyware installed on my computer behind my back. All of a sudden, I was bombarded with pop-up windows, and my computer slowed down to a mind-numbing crawl. My goal here is to help you avoid this problem, and to instruct you on how to successfully remove these nasty infections from your computer for free, no strings attached, no fake scans.

Before you start removing spyware from your computer, there are some things you should know. No software program is 100% successful in removing all spyware infections. The best you can hope for is that whatever infected your computer has a known, published solution, and is included in the definition files of the removal programs I will discuss later. Spyware removal programs often make changes to the Windows Registry. While this is unavoidable and generally safe with these programs, error messages for 'file not found' or (rarely) problems in booting Windows may follow spyware removal procedures. If you have any of these issues, I may be able to help you. The more advanced spyware and adware infections now have the ability to morph and reinstall themselves immediately after they are deleted from the system. These types of infections are called "polymorphic". Trojan viruses are also difficult to remove. These can be very stubborn to remove, and you likely need the assistance of a professional.

On to the free programs! Ad-Aware SE is a well-known free spyware detection and removal tool. It is about 70% effective. Be sure you download and use their free plug-ins to attack specific infections.

Spybot Search & Destroy is another well-known free spyware detection and removal tool. It is roughly 65% effective. Spybot also contains an excellent immunization (blocking) tool.

So what about the other 30% of spyware that Ad-Aware and Spybot leave behind? HijackThis is a not as popular as Ad-Aware and Spybot. This scanning program will help you discover any remaining spyware problems that they leave behind. HijackThis will be more likely to find the stubborn polymorphic infections and Trojan viruses that reinstall after they are removed. Therefore, this program is for the more experienced user. I do not recommend using HijackThis unless you are a very experienced computer expert. If you are afraid to try HijackThis, there are safe programs out there that you can pay to use. But my goal here is help you remove this junk for free.

Stay tuned for more, as I will be posting detailed guides on how to use these programs very soon.

Saturday, April 01, 2006

 

Google AdSense Disclaimer

My goal is to help you successfully remove spyware, adware, malware, and viruses from your computer for free. So why do I have Google Ads on my site? Because I’m only here to help you remove the basic and simple to remove infections.

I have filtered out all of the “known” ads that link to dodgy websites out there that advertise for anti-spyware programs that will do more harm to your PC than good. If you feel that you need to see what programs are out there that are safe to use that you have to pay for, you can be confident that the Google Ads will direct you to a safe program.

However, I stressed “known” because there are new fake programs being created every day, and those sites may not be in my filtered list.

Friday, March 31, 2006

 

Welcome to Spyware & Adware Removal

Effectively removing spyware, adware, malware, and trojan viruses is not easily done. I have learned the hard way on how to remove a lot of common nasty stuff. Some spyware can be removed in a few simple steps, while others takes several hours of patience and diligent work.

I thought I would put my experience to use, and create this blog and post how I have successfully cleaned my PC, and have kept it completely clean for several months now. I will be posting links to software downloads and step-by-step directions on how to remove some of the toughest spyware.

Keep checking back for updates, as I will be posting the first steps to a cleaner PC very soon.